DETERMINANTS OF COMPLIANCE WITH HEALTH AND SAFETY REGULATIONS IN NIGERIA’S CONSTRUCTION INDUSTRY
Main Article Content
Keywords
Compliance, Construction industry, Health and safety, Nigeria, Regulations.
Abstract
The accident rate of the construction industry is disproportionate to the number of its workers compared with other industries. Despite this, the Nigerian construction industry lags behind in tackling the health and safety (H&S) challenges posed by the hazardous activities of the industry and contextual issues Compliance with H&S regulations is one of the pi llars to achieving optimum H&S in the workplace; regrettably, its level is low in Nigeria. This low level of compliance with H&S
regulations in Nigeria remains one of the major factors blamed for the challenging state of H&S in Nigeria, especially in the c onstruction industry. Hence, this paper examines the determinants of compliance with H&S regulations in Nigeria’s
construction industry, unearthing the salient issues to compliance with H&S regulations in N igeria’s construction industry. Using compliance t heories, it explains the compliance behaviour of the Nigerian construction industry. Although studies on compliance with H&S regulations in developed countries abound, contextual influence prompts a study peculiar to Nigeria. A systematic review of availab le literature gathered through desk literature search and qualitative content
analysis were conducted The result of this study shows that key determinants to compliance with H&S regulations in the Nigerian construction indu stry include: culture, client in fluence, inadequate legislation, activities of the informal construction sec tor, beliefs, enforcement of H&S regulations, bribery and corruption . It is evident from this study that contextual issues may explain compliance behaviour . This paper goes further to conclude that irrespective of the inadequate regulations and lack of governmental support, stakeholders in the construction in dustry and trade unions can improve H&S . It also recommends that: building planning departments in local councils be involved in H&S enforcement; in tender selection, preference should be given to construction contractors with good safety records; H&S professionals should exploit the economic benefits of good H&S management system to attract management commitment
Article Metrics Graph
References
Anderson, J. (2007). Health and safety- Matching legislation and enforcement. Proceedings of the Institution of Civil Engineer. Management, Procurement and Law, 11-15.
Baxendale, T. and Owain, J. (2000). Construction design and management safety regulations in practice-progress on implementation. International Journal of Project Management, 18 (1), 33-40.
Diugwu, I. A., Baba, D. L., & Egila, A. E. (2012). Effective regulation and level of awareness: An expose of the Nigeria’s construction industry. Open Journal of Safety Science and Technology, Vol. 2.140-146.
Famakin, I. O., and Fawehinmi, O. S. (2012). Quantity surveyors’ perception of construction health and safety regulation in Nigeria. Journal of Building Performance, Vol 3 (1).
Fairman, R. & Yapp, C. (2005). Enforced self-regulation, prescription, and conceptions of compliance within small Business: The impact of enforcement. Law and Policy, 27 (4).
Federal Republic of Nigeria: Labour, Safety Health and welfare Bill of 2012.
Hofstede, G. (1991), Cultures and organisation: Software of the mind. McGraw-Hill. London.
HSE (2005) Making an impact on SME compliance behaviour: An evaluation of the effect of interventions upon compliance with health and safety legislation in small and medium sized enterprises. Prepared by Kings College London.
HSE (2008). The determinants of compliance with laws and regulations with special reference to health and safety: A literature review. Retrieved on 14-07-14 from http://www.hse.gov.uk/research/rrpdf/rr638.pdf
HSE (2013) Health and safety in construction in Great Britain, 2013. Retrieved from http://www.hse.gov.uk/statistics/industry/construction/construction.pdf on 12-07-14
Idoro, G. I (2007). A comparative Evaluation of health and safety performance of indigenous and Multinational construction firms in Nigeria. Construction Research Journal, 1(1) 65-75
Idoro, G. I. (2008). Health and safety management efforts as correlates of performance in the Nigerian construction industry. Journal of Civil Engineering and Management. Vol 14(4) 277-285.
Idoro, G. I. (2011a). Comparing occupational health and safety (OHS) management efforts and performance of Nigerian construction contractors. Journal of Construction in Developing Countries Vol. 16(2), 151–173.
Idoro, G. I. (2011b) Influence of construction site OHS Fatcilities on OHS performance in Nigeria. In: Laryea, S., Leiringer, R and Hughes, W. (Eds) Procs West Afria Bulit Environment Research (WABER) Conference. 19-21 July 2011, Accra, Ghana, 641-650.
Idubor, E. E., and Oisamoje, M. D. (2013). An exploration of health and safety management issues in Nigeria’s efforts to industrialize. European Scientific Journal. Vol. 9(12).
International Labour Organisation (ILO) C155 - Occupational Safety and Health Convention, 1981 (No. 155). Retrieved from http://www.ilo.org/dyn/normlex/en/f?p=NORMLEXPUB:12100:0::NO::P12100_ILO_CODE:C155
Jacobi, J. (2012). The compliance trap - Too much focus on regulations will shortchange your people & profits. ASSE Professional Safety Journal. Pp69-70.
Kalejaiye, P. (2013). Occupational health and safety: Issues, challenges and compensation in Nigeria. Peak Journal of Public Health and Management, Vol. 1(2), pp 16-23.
Kheni, N.A., Gibb, A.G.F and Dainty, A.R.J (2006). The management of construction site health and safety by small and medium-sided construction businesses in developing countries: A Ghana case study. In: Boyd, D (Ed.), Procs 22nd Annual ARCOM Conference, 4-6 September, 2006, Birmingham, UK. ARCOM, Vol. 1, 273-82
Kheni, N. A., Dainty, A. R. J and Gibb, A. G. F (2007). Influence of Political and Socio-Cultural Environment on Health and Safety Management within SMEs: A Ghana Case Study. In Boyd, D (Ed) Procs 3rd Annual Conference, 3-5 September 2007, Belfast, UK, Association of Researchers in Construction Management, 159-168.
Nzuve, S. N. M., and Lawrence, B. A. (2012). The extent of compliance with occupational safety and health regulations at registered workplaces in Nairobi. International Journal of Business, Humanities and Technology, Vol. 2 (2) 115-120.
Occupational Safety and Health branch, Labour Department (2013) Occupational safety and health statistics bulletin Issue no 13. Retrieved from
http://www.labour.gov.hk/eng/osh/pdf/Bulletin2012.pdf on 12-07-14
Odeyinka, H., Davison, C. and Olomolaiye, P. (2005). An assessment of factors inhibiting designers from complying with health and safety regulations in their design. Proc. of 21st Annual ARCOM Conference, 7-9 September, SOAS, University of London, Vol. 2, 905- 913.
Okeola, O. G. (2009). Occupational health and safety (OHS) assessments in the construction industry. Ist Annual Civil Engineering Conference, 26-28 August 2009, University of IIorin, Nigeria.
Okolie, K. C., and Okoye, P. U. (2012). Assessment of national culture and construction health and safety Climate in Nigeria. Science Journal Publication, Vol. 2012, 6 pp.
Onyeozili, E. C. (2005) Obstacles to effective policing in Nigeria. African Journal of Criminology and Justice Studies, Vol 1 NO (1), 32- 54.
Othman, A. A. E. (2012). A study of the causes and effect of contractors’ non-compliance with the health and safety regulations in the South African construction industry. Architectural Engineering and Design Management, Vol.8, 180-191.
Puplampu, B. B., and Quartey, S. H. (2012). Key Issues on occupational health and safety practices in Ghana: A Review. International Journal of Business and Social Science. Vol. 3(19), 151 -156.
Smallwood, J. J. (2002). The Influence of health and safety (H&S) culture on H&S Performance. In: Greenwood, D (Ed), 18th annual ARCOM conference, 2-4 September 2002, University of Northumbria. Association of Research in Construction Management, Vol.1, 217-226.
Smallwood, J.J., and Haupt, T. C. (2007). Impact of South African construction regulations on construction health and safety: Architects’ Perceptions. Journal of Engineering, Design and Technology, Vol 5(1).
Tanko, B. L., and Anigbogu, N. A. (2012). The use of personal protective equipment (PPE) on construction sites in Nigeria’. In: Laryea, S., Agyepong, S A., Leiringer, R. and Hughes, W. (Eds) Proc 4th West Africa Built Environment Research (WABER) Conference, 24-26 July 2012, Abuja, Nigeria, pp 1341-1384.
Tombs, S., and Whyte, D. (2013). The myths and realities of deterrence in workplace safety regulations. The British Journal of Criminology, Vol. 53 (5), 746-763.
Trading Economics (2013) Nigeria unemployment rate. Retrieved from http://www.tradingeconomics.com/nigeria/unemployment-rate
Transparency International (2012) Transparency international corruption perceptions index 2012. Retrieved from http://www.ey.com/Publication/vwLUAssets/2012_TI_CPI/$FILE/2012%20TI%20CPI.pdf
Umeokafor, N., Isaac, D., Jones, K., & Umeadi, B. (2013). Enforcement of occupational safety and health regulations in Nigeria: A exploration. Proceedings of the 1st International Scientific Forum, 3, 92-103.
Umeokafor, N.I., Umeadi, B., Jones, K., and Igwegbe, O. (2014). Compliance with occupational safety and health regulations in Nigeria’s public regulatory entity: A call for attention. International Journal of Scientific and Research Publications, Vol. 4, Issue 5.
Windapo, A., and Oladapo, A. (2012). Determinants of construction firms’ compliance with health and safety regulations in South Africa. In Smith, D.D (Ed) Procs 28th Annual ARCOM conference, 3-5 September 2012, Edinburgh, UK. Association of Research in Construction Management, 433-444.
Windapo, A. (2013). Relationship between degree of risk, cost and level of compliance to occupational health and safety regulations in construction. Australasian Journal of Construction Economics and Building, Vol 13(2), 67- 82.
Article Sidebar
Article Details
The Journal of Construction Project Management and Innovation (JCPMI) is committed to the principles of Open Access publishing and upholds the ethos of freely disseminating research findings to enhance knowledge and understanding within the field of construction project management and innovation.
In accordance with our commitment to open scholarly communication, all articles published by JCPMI are licensed under the Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC). This licensing agreement allows others to distribute, remix, adapt, and build upon the work non-commercially, as long as the original author and source are credited. The license also ensures that authors retain copyright over their work while allowing the wider community to access, use, and build upon the content.
The terms of the CC BY-NC license are designed to facilitate the following:
- Attribution: Users must give appropriate credit, provide a link to the license, and indicate if changes were made. This can be done in any reasonable manner, but not in any way that suggests the licensor endorses the user or their use.
- Non-Commercial: Users may not use the material for commercial purposes.
- No Additional Restrictions: Users may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
By publishing with JCPMI, authors agree to these terms and ensure that their work is accessible and reusable under the conditions of the CC BY-NC license, thereby contributing to the ongoing exchange of knowledge and information in an Open Access environment.
Creative Commons CC Attribution-NonCommercial 4.0 International Public License